Linksys PAP2 Configuration

=20	Firmware Version: 5.1.6(LS) =20

Voice

Phone Adapter = with 2 Ports=20 for Voice-Over-IP

PAP2

=20

Info

System

SIP

Provisioning

Regional

Line=20 1

Line=20 2

User=20 1

User=20 2

Advanced = View (switch to basic view)=20

User=20 Login =20

System Information
	DHCP:	Disabled	Current IP:	192.100.100.13
	Host Name:	pap2tB	Domain:
	Current Netmask:	255.255.255.0	Current Gateway:	192.100.100.111
	Primary DNS:	192.100.100.111
	Secondary DNS:
Product Information
	Product Name:	PAP2T	Serial Number:	FLI00J908171
	Software Version:	5.1.6(LS)	Hardware Version:	0.3.5
	MAC Address:	0023697E3CA2	Client Certificate:	Installed
	Customization:	Open
System Status
	Current Time:	3/19/2010 09:16:23	Elapsed Time:	00:04:19
	Broadcast Pkts Sent:	0	Broadcast Bytes Sent:	0
	Broadcast Pkts Recv:	26	Broadcast Bytes Recv:	1866
	Broadcast Pkts Dropped:	0	Broadcast Bytes Dropped:	0
	RTP Packets Sent:	91	RTP Bytes Sent:	21840
	RTP Packets Recv:	89	RTP Bytes Recv:	21360
	SIP Messages Sent:	45	SIP Bytes Sent:	24148
	SIP Messages Recv:	47	SIP Bytes Recv:	20908
	External IP:
Line=20 1 Status
	Display Name:	support309	User ID:	309
	Hook State:	On	Registration State:	Online
	Last Registration At:	3/19/2010 09:15:57	Next Registration In:	32 s
	Message Waiting:	No	Call Back Active:	No
	Last Called Number:	aa	Last Caller Number:
	Mapped SIP Port:
	Call 1 State:	Idle	Call 2 State:	Idle
	Call 1 Tone:	None	Call 2 Tone:	None
	Call 1 Encoder:		Call 2 Encoder:
	Call 1 Decoder:		Call 2 Decoder:
	Call 1 FAX:		Call 2 FAX:
	Call 1 Type:		Call 2 Type:
	Call 1 Remote Hold:		Call 2 Remote Hold:
	Call 1 Callback:		Call 2 Callback:
	Call 1 Peer Name:		Call 2 Peer Name:
	Call 1 Peer Phone:		Call 2 Peer Phone:
	Call 1 Duration:		Call 2 Duration:
	Call 1 Packets Sent:		Call 2 Packets Sent:
	Call 1 Packets Recv:		Call 2 Packets Recv:
	Call 1 Bytes Sent:		Call 2 Bytes Sent:
	Call 1 Bytes Recv:		Call 2 Bytes Recv:
	Call 1 Decode Latency:		Call 2 Decode Latency:
	Call 1 Jitter:		Call 2 Jitter:
	Call 1 Round Trip Delay:		Call 2 Round Trip Delay:
	Call 1 Packets Lost:		Call 2 Packets Lost:
	Call 1 Packet Error:		Call 2 Packet Error:
	Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:
	Call 1 Media Loopback:		Call 2 Media Loopback:
Line=20 2 Status
	Display Name:	support310	User ID:	310
	Hook State:	On	Registration State:	Online
	Last Registration At:	3/19/2010 09:15:57	Next Registration In:	32 s
	Message Waiting:	No	Call Back Active:	No
	Last Called Number:		Last Caller Number:
	Mapped SIP Port:
	Call 1 State:	Idle	Call 2 State:	Idle
	Call 1 Tone:	None	Call 2 Tone:	None
	Call 1 Type:		Call 2 Type:
	Call 1 Encoder:		Call 2 Encoder:
	Call 1 Decoder:		Call 2 Decoder:
	Call 1 FAX:		Call 2 FAX:
	Call 1 Remote Hold:		Call 2 Remote Hold:
	Call 1 Callback:		Call 2 Callback:
	Call 1 Peer Name:		Call 2 Peer Name:
	Call 1 Peer Phone:		Call 2 Peer Phone:
	Call 1 Duration:		Call 2 Duration:
	Call 1 Packets Sent:		Call 2 Packets Sent:
	Call 1 Packets Recv:		Call 2 Packets Recv:
	Call 1 Bytes Sent:		Call 2 Bytes Sent:
	Call 1 Bytes Recv:		Call 2 Bytes Recv:
	Call 1 Decode Latency:		Call 2 Decode Latency:
	Call 1 Jitter:		Call 2 Jitter:
	Call 1 Round Trip Delay:		Call 2 Round Trip Delay:
	Call 1 Packets Lost:		Call 2 Packets Lost:
	Call 1 Packet Error:		Call 2 Packet Error:
	Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:
	Call 1 Media Loopback:		Call 2 Media Loopback:

System Configuration
	Restricted Access Domains:
	Enable Web Server:	Web Server Port:
	Enable Web Admin Access:	Admin Passwd:
	User Password:
Internet Connection Type
	DHCP:
	Static IP:	NetMask:
	Gateway:
Optional Network = Configuration
	HostName:	Domain:
	Primary DNS:	Secondary DNS:
	DNS Server Order:	DNS Query Mode:
	Syslog Server:	Debug Server:
	Debug Level:	Primary NTP Server:
	Secondary NTP Server:

SIP=20 Parameters
	Max Forward:	Max Redirection:
	Max Auth:	SIP User Agent Name:
	SIP Server Name:	SIP Reg User Agent Name:
	SIP Accept Language:	DTMF Relay MIME Type:
	Hook Flash MIME Type:	Remove Last Reg:
	Use Compact Header:	Escape Display Name:
	RFC 2543 Call Hold:	Softswitch Features:
	Mark All AVT Packets:
SIP=20 Timer Values (sec)
	SIP T1:	SIP T2:
	SIP T4:	SIP Timer B:
	SIP Timer F:	SIP Timer H:
	SIP Timer D:	SIP Timer J:
	INVITE Expires:	ReINVITE Expires:
	Reg Min Expires:	Reg Max Expires:
	Reg Retry Intvl:	Reg Retry Long Intvl:
	Reg Retry Random Delay:	Reg Retry Long Random Delay:
	Reg Retry Intvl Cap:
Response Status Code = Handling
	SIT1 RSC:	SIT2 RSC:
	SIT3 RSC:	SIT4 RSC:
	Try Backup RSC:	Retry Reg RSC:
RTP=20 Parameters
	RTP Port Min:	RTP Port Max:
	RTP Packet Size:	Max RTP ICMP Err:
	RTCP Tx Interval:	No UDP Checksum:
	Stats In BYE:
SDP=20 Payload Types
	NSE Dynamic Payload:	AVT Dynamic Payload:
	INFOREQ Dynamic Payload:	G726r16 Dynamic Payload:
	G726r24 Dynamic Payload:	G726r32 Dynamic Payload:
	G726r40 Dynamic Payload:	G729b Dynamic Payload:
	EncapRTP Dynamic Payload:	RTP-Start-Loopback Dynamic Payload:
	RTP-Start-Loopback Codec:	NSE Codec Name:
	AVT Codec Name:	G711u Codec Name:
	G711a Codec Name:	G726r16 Codec Name:
	G726r24 Codec Name:	G726r32 Codec Name:
	G726r40 Codec Name:	G729a Codec Name:
	G729b Codec Name:	G723 Codec Name:
	EncapRTP Codec Name:
NAT=20 Support Parameters
	Handle VIA received:	Handle VIA rport:
	Insert VIA received:	Insert VIA rport:
	Substitute VIA Addr:	Send Resp To Src Port:
	STUN Enable:	STUN Test Enable:
	STUN Server:	EXT IP:
	EXT RTP Port Min:	NAT Keep Alive Intvl:

Configuration Profile
	Provision Enable:	Resync On Reset:
	Resync Random Delay:	Resync Periodic:
	Resync Error Retry Delay:	Forced Resync Delay:
	Resync From SIP:	Resync After Upgrade Attempt:
	Resync Trigger 1:
	Resync Trigger 2:
	Resync Fails On FNF:
	Profile Rule:
	Profile Rule B:
	Profile Rule C:
	Profile Rule D:
	Log Resync Request Msg:
	Log Resync Success Msg:
	Log Resync Failure Msg:
	Report Rule:
Firmware Upgrade
	Upgrade Enable:	Upgrade Error Retry Delay:
	Downgrade Rev Limit:
	Upgrade Rule:
	Log Upgrade Request Msg:
	Log Upgrade Success Msg:
	Log Upgrade Failure Msg:
General Purpose Parameters
	GPP A:
	GPP B:
	GPP C:
	GPP D:
	GPP E:
	GPP F:
	GPP G:
	GPP H:
	GPP I:
	GPP J:
	GPP K:
	GPP L:
	GPP M:
	GPP N:
	GPP O:
	GPP P:

Call=20 Progress Tones
	Dial Tone:
	Second Dial Tone:
	Outside Dial Tone:
	Prompt Tone:
	Busy Tone:
	Reorder Tone:
	Off Hook Warning Tone:
	Ring Back Tone:
	Confirm Tone:
	SIT1 Tone:
	SIT2 Tone:
	SIT3 Tone:
	SIT4 Tone:
	MWI Dial Tone:
	Cfwd Dial Tone:
	DND Dial Tone:
	Holding Tone:
	Conference Tone:
	Secure Call Indication Tone:
	Feature Invocation Tone:
Distinctive Ring Patterns
	Ring1 Cadence:	Ring2 Cadence:
	Ring3 Cadence:	Ring4 Cadence:
	Ring5 Cadence:	Ring6 Cadence:
	Ring7 Cadence:	Ring8 Cadence:
Distinctive Call Waiting Tone = Patterns
	CWT1 Cadence:	CWT2 Cadence:
	CWT3 Cadence:	CWT4 Cadence:
	CWT5 Cadence:	CWT6 Cadence:
	CWT7 Cadence:	CWT8 Cadence:
Distinctive Ring/CWT Pattern = Names
	Ring1 Name:	Ring2 Name:
	Ring3 Name:	Ring4 Name:
	Ring5 Name:	Ring6 Name:
	Ring7 Name:	Ring8 Name:
Ring=20 and Call Waiting Tone Spec
	Ring Waveform:	Ring Frequency:
	Ring Voltage:	CWT Frequency:
	Synchronized Ring:
Control Timer Values (sec)
	Hook Flash Timer Min:	Hook Flash Timer Max:
	Callee On Hook Delay:	Reorder Delay:
	Call Back Expires:	Call Back Retry Intvl:
	Call Back Delay:	VMWI Refresh Intvl:
	Interdigit Long Timer:	Interdigit Short Timer:
	CPC Delay:	CPC Duration:
Vertical Service Activation = Codes
	Call Return Code:	Blind Transfer Code:
	Call Back Act Code:	Call Back Deact Code:
	Cfwd All Act Code:	Cfwd All Deact Code:
	Cfwd Busy Act Code:	Cfwd Busy Deact Code:
	Cfwd No Ans Act Code:	Cfwd No Ans Deact Code:
	Cfwd Last Act Code:	Cfwd Last Deact Code:
	Block Last Act Code:	Block Last Deact Code:
	Accept Last Act Code:	Accept Last Deact Code:
	CW Act Code:	CW Deact Code:
	CW Per Call Act Code:	CW Per Call Deact Code:
	Block CID Act Code:	Block CID Deact Code:
	Block CID Per Call Act Code:	Block CID Per Call Deact Code:
	Block ANC Act Code:	Block ANC Deact Code:
	DND Act Code:	DND Deact Code:
	CID Act Code:	CID Deact Code:
	CWCID Act Code:	CWCID Deact Code:
	Dist Ring Act Code:	Dist Ring Deact Code:
	Speed Dial Act Code:	Secure All Call Act Code:
	Secure No Call Act Code:	Secure One Call Act Code:
	Secure One Call Deact Code:	Conference Act Code:
	Attn-Xfer Act Code:	Modem Line Toggle Code:
	Media Loopback Code:
	Referral Services Codes:
	Feature Dial Services Codes:
Vertical Service Announcement = Codes
	Service Annc Base Number:
	Service Annc Extension Codes:
Outbound Call Codec Selection = Codes
	Prefer G711u Code:	Force G711u Code:
	Prefer G711a Code:	Force G711a Code:
	Prefer G723 Code:	Force G723 Code:
	Prefer G726r16 Code:	Force G726r16 Code:
	Prefer G726r24 Code:	Force G726r24 Code:
	Prefer G726r32 Code:	Force G726r32 Code:
	Prefer G726r40 Code:	Force G726r40 Code:
	Prefer G729a Code:	Force G729a Code:
Miscellaneous
	Set Local Date (mm/dd):	Set Local Time (HH/mm):
	Time Zone:	FXS Port Impedance:
	Daylight Saving Time Rule:
	FXS Port Input Gain:	FXS Port Output Gain:
	DTMF Playback Level:	DTMF Playback Length:
	Detect ABCD:	Playback ABCD:
	Caller ID Method:	FXS Port Power Limit:
	Caller ID FSK Standard:	Feature Invocation Method:
	More Echo Suppression:


	Line Enable:
Streaming Audio Server = (SAS)
	SAS Enable:		SAS DLG Refresh Intvl:
	SAS Inbound RTP Sink:
NAT=20 Settings
	NAT Mapping Enable:		NAT Keep Alive Enable:
	NAT Keep Alive Msg:		NAT Keep Alive Dest:
Network Settings
	SIP TOS/DiffServ Value:		Network Jitter Level:
	RTP TOS/DiffServ Value:		Jitter Buffer Adjustment:
SIP=20 Settings
	SIP Port:		SIP 100REL Enable:
	EXT SIP Port:		Auth Resync-Reboot:
	Auth INVITE:		Auth MWI:
	SIP Proxy-Require:		SIP Remote-Party-ID:
	SIP GUID:		SIP Debug Option:
	RTP Log Intvl:		Restrict Source IP:
	Referor Bye Delay:		Refer Target Bye Delay:
	Referee Bye Delay:		Refer-To Target Contact:
	Sticky 183:
Call=20 Feature Settings
	Blind Attn-Xfer Enable:		MOH Server:
	Xfer When Hangup Conf:		Conference Bridge URL:
	Conference Bridge Ports:
Proxy=20 and Registration
	Proxy:		Use Outbound Proxy:
	Outbound Proxy:		Use OB Proxy In Dialog:
	Register:		Make Call Without Reg:
	Register Expires:		Ans Call Without Reg:
	Use DNS SRV:		DNS SRV Auto Prefix:
	Proxy Fallback Intvl:		Proxy Redundancy Method:
	Voice Mail Server:		Mailbox Subscribe Expires:
Subscriber Information
	Display Name:		User ID:
	Password:		Use Auth ID:
	Auth ID:
	Mini Certificate:
	SRTP Private Key:
Supplementary Service = Subscription
	Call Waiting Serv:		Block CID Serv:
	Block ANC Serv:		Dist Ring Serv:
	Cfwd All Serv:		Cfwd Busy Serv:
	Cfwd No Ans Serv:		Cfwd Sel Serv:
	Cfwd Last Serv:		Block Last Serv:
	Accept Last Serv:		DND Serv:
	CID Serv:		CWCID Serv:
	Call Return Serv:		Call Back Serv:
	Three Way Call Serv:		Three Way Conf Serv:
	Attn Transfer Serv:		Unattn Transfer Serv:
	MWI Serv:		VMWI Serv:
	Speed Dial Serv:		Secure Call Serv:
	Referral Serv:		Feature Dial Serv:
	Service Announcement Serv:
Audio=20 Configuration
	Preferred Codec:		Silence Supp Enable:
	Use Pref Codec Only:		Silence Threshold:
	G729a Enable:		Echo Canc Enable:
	G723 Enable:		Echo Canc Adapt Enable:
	G726-16 Enable:		Echo Supp Enable:
	G726-24 Enable:		FAX CED Detect Enable:
	G726-32 Enable:		FAX CNG Detect Enable:
	G726-40 Enable:		FAX Passthru Codec:
	DTMF Process INFO:		FAX Codec Symmetric:
	DTMF Process AVT:		FAX Passthru Method:
	DTMF Tx Method:		DTMF Tx Mode:
	FAX Process NSE:		Hook Flash Tx Method:
	FAX Disable ECAN:		Release Unused Codec:
Dial=20 Plan
	Dial Plan:	\|<*97:vmm>\|0,[3469]11S0\|0,[2-9]xxxxxx\|0,[2-9]xxxxxxxxxS0\|= 0,1[2-9]xxxxxxxxxS0\|0,011xx.\|xxx.\|[23456789])"=20 name=3D31407>
	Enable IP Dialing:		Emergency Number:
FXS=20 Port Polarity Configuration
	Idle Polarity:		Caller Conn Polarity:
	Callee Conn Polarity:


	Line Enable:
Streaming Audio Server = (SAS)
	SAS Enable:		SAS DLG Refresh Intvl:
	SAS Inbound RTP Sink:
NAT=20 Settings
	NAT Mapping Enable:		NAT Keep Alive Enable:
	NAT Keep Alive Msg:		NAT Keep Alive Dest:
Network Settings
	SIP TOS/DiffServ Value:		Network Jitter Level:
	RTP TOS/DiffServ Value:		Jitter Buffer Adjustment:
SIP=20 Settings
	SIP Port:		SIP 100REL Enable:
	EXT SIP Port:		Auth Resync-Reboot:
	Auth INVITE:		Auth MWI:
	SIP Proxy-Require:		SIP Remote-Party-ID:
	SIP GUID:		SIP Debug Option:
	RTP Log Intvl:		Restrict Source IP:
	Referor Bye Delay:		Refer Target Bye Delay:
	Referee Bye Delay:		Refer-To Target Contact:
	Sticky 183:
Call=20 Feature Settings
	Blind Attn-Xfer Enable:		MOH Server:
	Xfer When Hangup Conf:		Conference Bridge URL:
	Conference Bridge Ports:
Proxy=20 and Registration
	Proxy:		Use Outbound Proxy:
	Outbound Proxy:		Use OB Proxy In Dialog:
	Register:		Make Call Without Reg:
	Register Expires:		Ans Call Without Reg:
	Use DNS SRV:		DNS SRV Auto Prefix:
	Proxy Fallback Intvl:		Proxy Redundancy Method:
	Voice Mail Server:		Mailbox Subscribe Expires:
Subscriber Information
	Display Name:		User ID:
	Password:		Use Auth ID:
	Auth ID:
	Mini Certificate:
	SRTP Private Key:
Supplementary Service = Subscription
	Call Waiting Serv:		Block CID Serv:
	Block ANC Serv:		Dist Ring Serv:
	Cfwd All Serv:		Cfwd Busy Serv:
	Cfwd No Ans Serv:		Cfwd Sel Serv:
	Cfwd Last Serv:		Block Last Serv:
	Accept Last Serv:		DND Serv:
	CID Serv:		CWCID Serv:
	Call Return Serv:		Call Back Serv:
	Three Way Call Serv:		Three Way Conf Serv:
	Attn Transfer Serv:		Unattn Transfer Serv:
	MWI Serv:		VMWI Serv:
	Speed Dial Serv:		Secure Call Serv:
	Referral Serv:		Feature Dial Serv:
	Service Announcement Serv:
Audio=20 Configuration
	Preferred Codec:		Silence Supp Enable:
	Use Pref Codec Only:		Silence Threshold:
	G729a Enable:		Echo Canc Enable:
	G723 Enable:		Echo Canc Adapt Enable:
	G726-16 Enable:		Echo Supp Enable:
	G726-24 Enable:		FAX CED Detect Enable:
	G726-32 Enable:		FAX CNG Detect Enable:
	G726-40 Enable:		FAX Passthru Codec:
	DTMF Process INFO:		FAX Codec Symmetric:
	DTMF Process AVT:		FAX Passthru Method:
	DTMF Tx Method:		DTMF Tx Mode:
	FAX Process NSE:		Hook Flash Tx Method:
	FAX Disable ECAN:		Release Unused Codec:
Dial=20 Plan
	Dial Plan:	\|<*97:vmm>\|0,[3469]11S0\|0,[2-9]xxxxxx\|0,[2-9]xxxxxxxxxS0\|= 0,1[2-9]xxxxxxxxxS0\|0,011xx.\|xxx.\|[23456789])"=20 name=3D30767>
	Enable IP Dialing:		Emergency Number:
FXS=20 Port Polarity Configuration
	Idle Polarity:		Caller Conn Polarity:
	Callee Conn Polarity:

Call=20 Forward Settings
	Cfwd All Dest:	Cfwd Busy Dest:
	Cfwd No Ans Dest:	Cfwd No Ans Delay:
Selective Call Forward = Settings
	Cfwd Sel1 Caller:	Cfwd Sel1 Dest:
	Cfwd Sel2 Caller:	Cfwd Sel2 Dest:
	Cfwd Sel3 Caller:	Cfwd Sel3 Dest:
	Cfwd Sel4 Caller:	Cfwd Sel4 Dest:
	Cfwd Sel5 Caller:	Cfwd Sel5 Dest:
	Cfwd Sel6 Caller:	Cfwd Sel6 Dest:
	Cfwd Sel7 Caller:	Cfwd Sel7 Dest:
	Cfwd Sel8 Caller:	Cfwd Sel8 Dest:
	Cfwd Last Caller:	Cfwd Last Dest:
	Block Last Caller:	Accept Last Caller:
Speed=20 Dial Settings
	Speed Dial 2:	Speed Dial 3:
	Speed Dial 4:	Speed Dial 5:
	Speed Dial 6:	Speed Dial 7:
	Speed Dial 8:	Speed Dial 9:
Supplementary Service = Settings
	CW Setting:	Block CID Setting:
	Block ANC Setting:	DND Setting:
	CID Setting:	CWCID Setting:
	Dist Ring Setting:	Secure Call Setting:
	Message Waiting:	DND Activated:
	Accept Media Loopback Request:	Media Loopback Mode:
	Media Loopback Type:
Distinctive Ring Settings
	Ring1 Caller:	Ring2 Caller:
	Ring3 Caller:	Ring4 Caller:
	Ring5 Caller:	Ring6 Caller:
	Ring7 Caller:	Ring8 Caller:
Ring=20 Settings
	Default Ring:	Default CWT:
	Hold Reminder Ring:	Call Back Ring:
	Cfwd Ring Splash Len:	Cblk Ring Splash Len:
	VMWI Ring Splash Len:
	VMWI Ring Policy:
	Ring On No New VM:

Call=20 Forward Settings
	Cfwd All Dest:	Cfwd Busy Dest:
	Cfwd No Ans Dest:	Cfwd No Ans Delay:
Selective Call Forward = Settings
	Cfwd Sel1 Caller:	Cfwd Sel1 Dest:
	Cfwd Sel2 Caller:	Cfwd Sel2 Dest:
	Cfwd Sel3 Caller:	Cfwd Sel3 Dest:
	Cfwd Sel4 Caller:	Cfwd Sel4 Dest:
	Cfwd Sel5 Caller:	Cfwd Sel5 Dest:
	Cfwd Sel6 Caller:	Cfwd Sel6 Dest:
	Cfwd Sel7 Caller:	Cfwd Sel7 Dest:
	Cfwd Sel8 Caller:	Cfwd Sel8 Dest:
	Cfwd Last Caller:	Cfwd Last Dest:
	Block Last Caller:	Accept Last Caller:
Speed=20 Dial Settings
	Speed Dial 2:	Speed Dial 3:
	Speed Dial 4:	Speed Dial 5:
	Speed Dial 6:	Speed Dial 7:
	Speed Dial 8:	Speed Dial 9:
Supplementary Service = Settings
	CW Setting:	Block CID Setting:
	Block ANC Setting:	DND Setting:
	CID Setting:	CWCID Setting:
	Dist Ring Setting:	Secure Call Setting:
	Message Waiting:	DND Activated:
	Accept Media Loopback Request:	Media Loopback Mode:
	Media Loopback Type:
Distinctive Ring Settings
	Ring1 Caller:	Ring2 Caller:
	Ring3 Caller:	Ring4 Caller:
	Ring5 Caller:	Ring6 Caller:
	Ring7 Caller:	Ring8 Caller:
Ring=20 Settings
	Default Ring:	Default CWT:
	Hold Reminder Ring:	Call Back Ring:
	Cfwd Ring Splash Len:	Cblk Ring Splash Len:
	VMWI Ring Splash Len:
	VMWI Ring Policy:
	Ring On No New VM: