Cisco-Linksys, LLC

 
Product Information
Product Name: SPA-3102 Serial Number: FM600H508962
Software Version: 5.1.10(GW) Hardware Version: 1.4.5(a)
MAC Address: 000E08CF9E37 Client Certificate: Installed
Customization: Open
 
System Status
Current Time: 9/26/2010 03:32:37 Elapsed Time: 01:52:01
RTP Packets Sent: 2345 RTP Bytes Sent: 551236
RTP Packets Recv: 2336 RTP Bytes Recv: 560640
SIP Messages Sent: 193 SIP Bytes Sent: 98153
SIP Messages Recv: 175 SIP Bytes Recv: 86507
External IP:
 
Line 1 Status
Hook State: On Registration State: Registered
Last Registration At: 9/26/2010 03:31:59 Next Registration In: 20 s
Message Waiting: No Call Back Active: No
Last Called Number: aa Last Caller Number: 300
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
Call 1 Media Loopback: Call 2 Media Loopback:
 
PSTN Line Status
Hook State: On Line Voltage: 0 (V)
Loop Current: 0.0 (mA) Registration State: Not Registered
Last Registration At: Next Registration In:
Last Called VoIP Number: Last Called PSTN Number:
Last VoIP Caller: Last PSTN Caller:
Last PSTN Disconnect Reason: PSTN Activity Timer: 30000 (ms)
Mapped SIP Port: Call Type:
VoIP State: Idle
PSTN State: Idle VoIP Tone:
PSTN Tone: VoIP Peer Name:
PSTN Peer Name: VoIP Peer Number:
PSTN Peer Number: VoIP Call Encoder:
VoIP Call Decoder: VoIP Call FAX:
VoIP Call Remote Hold: VoIP Call Duration:
VoIP Call Packets Sent: VoIP Call Packets Recv:
VoIP Call Bytes Sent: VoIP Call Bytes Recv:
VoIP Call Decode Latency: VoIP Call Jitter:
VoIP Call Round Trip Delay: VoIP Call Packets Lost:
VoIP Call Packet Error: VoIP Call Mapped RTP Port:

 
System Configuration
Restricted Access Domains:
Enable Web Admin Access: Admin Passwd:
User Password:
 
Miscellaneous Settings
Syslog Server: Debug Server:
Debug Level:

 
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Hook Flash MIME Type: Remove Last Reg:
Use Compact Header: Escape Display Name:
RFC 2543 Call Hold: Mark All AVT Packets:
SIP TCP Port Min: SIP TCP Port Max:
 
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap:
 
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
 
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum:
Stats In BYE:
 
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r32 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
EncapRTP Dynamic Payload: RTP-Start-Loopback Dynamic Payload:
RTP-Start-Loopback Codec: NSE Codec Name:
AVT Codec Name: G711u Codec Name:
G711a Codec Name: G726r16 Codec Name:
G726r24 Codec Name: G726r32 Codec Name:
G726r40 Codec Name: G729a Codec Name:
G729b Codec Name: G723 Codec Name:
EncapRTP Codec Name:
 
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: TURN Server:
Auth Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:

 
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
 
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
License Keys:
 
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:

 
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Ring Back 2 Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
VoIP PIN Tone:
PSTN PIN Tone:
Feature Invocation Tone:
 
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
Ring9 Cadence:
 
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
CWT9 Cadence:
 
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
Ring9 Name:
 
Ring and Call Waiting Tone Spec
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
 
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
 
Vertical Service Activation Codes
Call Return Code: Call Redial Code:
Blind Transfer Code: Call Back Act Code:
Call Back Deact Code: Call Back Busy Act Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code:
FAX Line Toggle Code: Media Loopback Code:
Referral Services Codes:
Feature Dial Services Codes:
 
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
 
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
 
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: FXS Port Impedance:
Daylight Saving Time Rule:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method: Caller ID FSK Standard:
Feature Invocation Method: More Echo Suppression:

 
Line Enable:
 
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP ToS/DiffServ Value: SIP CoS Value: [0-7]
RTP ToS/DiffServ Value: RTP CoS Value: [0-7]
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Auth INVITE: Reply 182 On Call Waiting:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
Voice Mail Server: Mailbox Subscribe Expires:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Redial Serv:
Call Back Serv: Three Way Call Serv:
Three Way Conf Serv: Attn Transfer Serv:
Unattn Transfer Serv: MWI Serv:
VMWI Serv: Speed Dial Serv:
Secure Call Serv: Referral Serv:
Feature Dial Serv: Service Announcement Serv:
 
Audio Configuration
Preferred Codec: Second Preferred Codec:
Third Preferred Codec: Use Pref Codec Only:
Silence Supp Enable: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
DTMF Process INFO: FAX Codec Symmetric:
DTMF Process AVT: FAX Passthru Method:
DTMF Tx Method: DTMF Tx Mode:
DTMF Tx Strict Hold Off Time: FAX Process NSE:
Hook Flash Tx Method: FAX Disable ECAN:
Release Unused Codec: FAX Enable T38:
FAX T38 Redundancy: FAX Tone Detect Mode:
Symmetric RTP:
 
Gateway Accounts
Gateway 1: GW1 NAT Mapping Enable:
GW1 Auth ID: GW1 Password:
Gateway 2: GW2 NAT Mapping Enable:
GW2 Auth ID: GW2 Password:
Gateway 3: GW3 NAT Mapping Enable:
GW3 Auth ID: GW3 Password:
Gateway 4: GW4 NAT Mapping Enable:
GW4 Auth ID: GW4 Password:
 
VoIP Fallback To PSTN
Auto PSTN Fallback:
 
Dial Plan
Dial Plan:
Enable IP Dialing: Emergency Number:
 
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:

 
Line Enable:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP ToS/DiffServ Value: SIP CoS Value: [0-7]
RTP ToS/DiffServ Value: RTP CoS Value: [0-7]
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option: RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay: Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
Auth INVITE:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Process INFO: FAX Passthru Method:
DTMF Process AVT: DTMF Tx Method:
DTMF Tx Mode: DTMF Tx Strict Hold Off Time:
Release Unused Codec: FAX Process NSE:
Symmetric RTP: FAX Disable ECAN:
 
Dial Plans
Dial Plan 1:
Dial Plan 2:
Dial Plan 3:
Dial Plan 4:
Dial Plan 5:
Dial Plan 6:
Dial Plan 7:
Dial Plan 8:
 
VoIP-To-PSTN Gateway Setup
VoIP-To-PSTN Gateway Enable: VoIP Caller Auth Method:
VoIP PIN Max Retry: One Stage Dialing:
Line 1 VoIP Caller DP: VoIP Caller Default DP:
Line 1 Fallback DP:
VoIP Caller ID Pattern:
VoIP Access List:
VoIP Caller 1 PIN: VoIP Caller 1 DP:
VoIP Caller 2 PIN: VoIP Caller 2 DP:
VoIP Caller 3 PIN: VoIP Caller 3 DP:
VoIP Caller 4 PIN: VoIP Caller 4 DP:
VoIP Caller 5 PIN: VoIP Caller 5 DP:
VoIP Caller 6 PIN: VoIP Caller 6 DP:
VoIP Caller 7 PIN: VoIP Caller 7 DP:
VoIP Caller 8 PIN: VoIP Caller 8 DP:
 
VoIP Users and Passwords (HTTP Authentication)
VoIP User 1 Auth ID: VoIP User 1 DP:
VoIP User 1 Password:
VoIP User 2 Auth ID: VoIP User 2 DP:
VoIP User 2 Password:
VoIP User 3 Auth ID: VoIP User 3 DP:
VoIP User 3 Password:
VoIP User 4 Auth ID: VoIP User 4 DP:
VoIP User 4 Password:
VoIP User 5 ID Auth ID: VoIP User 5 DP:
VoIP User 5 Password:
VoIP User 6 Auth ID: VoIP User 6 DP:
VoIP User 6 Password:
VoIP User 7 Auth ID: VoIP User 7 DP:
VoIP User 7 Password:
VoIP User 8 Auth ID: VoIP User 8 DP:
VoIP User 8 Password:
 
PSTN-To-VoIP Gateway Setup
PSTN-To-VoIP Gateway Enable: PSTN Caller Auth Method:
PSTN Ring Thru Line 1: PSTN PIN Max Retry:
PSTN CID For VoIP CID: PSTN CID Number Prefix:
PSTN Caller Default DP: Off Hook While Calling VoIP:
Line 1 Signal Hook Flash To PSTN: PSTN CID Name Prefix:
PSTN Caller ID Pattern:
PSTN Access List:
PSTN Caller 1 PIN: PSTN Caller 1 DP:
PSTN Caller 2 PIN: PSTN Caller 2 DP:
PSTN Caller 3 PIN: PSTN Caller 3 DP:
PSTN Caller 4 PIN: PSTN Caller 4 DP:
PSTN Caller 5 PIN: PSTN Caller 5 DP:
PSTN Caller 6 PIN: PSTN Caller 6 DP:
PSTN Caller 7 PIN: PSTN Caller 7 DP:
PSTN Caller 8 PIN: PSTN Caller 8 DP:
 
FXO Timer Values (sec)
VoIP Answer Delay: VoIP PIN Digit Timeout:
PSTN Answer Delay: PSTN PIN Digit Timeout:
PSTN-To-VoIP Call Max Dur: PSTN Ring Thru Delay:
VoIP-To-PSTN Call Max Dur: PSTN Ring Thru CWT Delay:
VoIP DLG Refresh Intvl: PSTN Ring Timeout:
PSTN Dialing Delay: PSTN Dial Digit Len:
PSTN Hook Flash Len:
 
PSTN Disconnect Detection
Detect CPC: Detect Polarity Reversal:
Detect PSTN Long Silence: Detect VoIP Long Silence:
PSTN Long Silence Duration: VoIP Long Silence Duration:
PSTN Silence Threshold: Min CPC Duration:
Detect Disconnect Tone:
Disconnect Tone:
 
International Control
FXO Port Impedance: Ring Frequency Min:
SPA To PSTN Gain: Ring Frequency Max:
PSTN To SPA Gain: Ring Validation Time:
Tip/Ring Voltage Adjust: Ring Indication Delay:
Operational Loop Current Min: Ring Timeout:
On-Hook Speed: Ring Threshold:
Current Limiting Enable: Ringer Impedance:
Line-In-Use Voltage:

 
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
 
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
 
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting: Accept Media Loopback Request:
Media Loopback Mode: Media Loopback Type:
 
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring9 Caller:
 
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len: VMWI Ring Policy:
Ring On No New VM:

 
PSTN-To-VoIP Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
 
PSTN-To-VoIP Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
PSTN Ring Thru Line 1 Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
Ring9 Caller:
 
PSTN Ring Thru Line 1 Ring Settings
Default Ring:
   
User Login    basic  | advanced



Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.