Cisco-Linksys, LLC

User Login    basic  |  advanced
Personal Directory    Call History
SPA932 Status


 
System Information
DHCP: DHCP Current IP: 192.168.50.103
Host Name: SipuraSPA Domain: STAC.Cisco.com
Current Netmask: 255.255.255.0 Current Gateway: 192.168.50.1
Primary DNS: 4.2.2.2
Secondary DNS: 4.2.2.1
 
Product Information
Product Name: SPA-962 Serial Number: 4MM00G805744
Software Version: 6.1.5(a) Hardware Version: 1.0.3(6776)
MAC Address: 000E08DF423C Client Certificate: Installed
Customization: Open Licenses: None
 
Phone Status
Current Time: 9/26/2010 13:10:44 Elapsed Time: 01:04:43
Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0
Broadcast Pkts Recv: 2057 Broadcast Bytes Recv: 188636
Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0
RTP Packets Sent: 153 RTP Bytes Sent: 36720
RTP Packets Recv: 155 RTP Bytes Recv: 37200
SIP Messages Sent: 247 SIP Bytes Sent: 136646
SIP Messages Recv: 250 SIP Bytes Recv: 107543
External IP: Operational VLAN ID: n/a
 
Ext 1 Status
Registration State: Registered Last Registration At: 9/26/2010 13:10:29
Next Registration In: 8 s Message Waiting: No
Mapped SIP Port:
 
Ext 2 Status
Registration State: Not Registered Last Registration At:
Next Registration In: Message Waiting: No
Mapped SIP Port:
 
Ext 3 Status
Registration State: Not Registered Last Registration At:
Next Registration In: Message Waiting: No
Mapped SIP Port:
 
Ext 4 Status
Registration State: Not Registered Last Registration At:
Next Registration In: Message Waiting: No
Mapped SIP Port:
 
Ext 5 Status
Registration State: Not Registered Last Registration At:
Next Registration In: Message Waiting: No
Mapped SIP Port:
 
Ext 6 Status
Registration State: Not Registered Last Registration At:
Next Registration In: Message Waiting: No
Mapped SIP Port:
 
Line 1 Call 1 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 1 Call 2 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 2 Call 1 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 2 Call 2 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 3 Call 1 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 3 Call 2 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 4 Call 1 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 4 Call 2 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 5 Call 1 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 5 Call 2 Status
Call State: Disabled Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 6 Call 1 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Line 6 Call 2 Status
Call State: Idle Tone: None
Encoder: Decoder:
Type: Remote Hold:
Callback: Peer Name:
Peer Phone: Duration:
Packets Sent: Packets Recv:
Bytes Sent: Bytes Recv:
Decode Latency: Jitter:
Round Trip Delay: Packets Lost:
Packet Error: Mapped RTP Port:
Media Loopback:
 
Downloaded Ring Tone
Status: Idle
Ring Tone 1: Not Installed
Ring Tone 2: Not Installed

 
System Configuration
Restricted Access Domains:
Enable Web Server: Web Server Port:
Enable Web Admin Access: Admin Passwd:
User Password:
 
Internet Connection Type
Connection Type:
 
Static IP Settings
Static IP: NetMask:
Gateway:
 
PPPoE Settings
PPPoE Login Name: PPPoE Login Password:
PPPoE Service Name:
 
Optional Network Configuration
HostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: DNS Query Mode:
Syslog Server: Debug Server:
Debug Level: Primary NTP Server:
Secondary NTP Server:
 
VLAN Settings
Enable VLAN: Enable CDP:
VLAN ID: PC Port VLAN Highest Priority:
Enable PC Port VLAN Tagging: PC Port VLAN ID:

 
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Remove Last Reg: Use Compact Header:
Escape Display Name: SIP-B Enable:
Talk Package: Hold Package:
Conference Package: Notify Conference:
RFC 2543 Call Hold: Random REG CID On Reboot:
Mark All AVT Packets: SIP TCP Port Min:
SIP TCP Port Max: CTI Enable:
Caller ID Header: SRTP Method:
Hold Target Before REFER:
 
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap: Sub Min Expires:
Sub Max Expires: Sub Retry Intvl:
 
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
 
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum:
Symmetric RTP: Stats In BYE:
 
SDP Payload Types
AVT Dynamic Payload: INFOREQ Dynamic Payload:
G726r16 Dynamic Payload: G726r24 Dynamic Payload:
G726r32 Dynamic Payload: G726r40 Dynamic Payload:
G729b Dynamic Payload: EncapRTP Dynamic Payload:
RTP-Start-Loopback Dynamic Payload: RTP-Start-Loopback Codec:
AVT Codec Name: G711u Codec Name:
G711a Codec Name: G726r16 Codec Name:
G726r24 Codec Name: G726r32 Codec Name:
G726r40 Codec Name: G729a Codec Name:
G729b Codec Name: G723 Codec Name:
EncapRTP Codec Name:
 
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:
 
Linksys Key System Parameters
Linksys Key System: Multicast Address:
Force LAN Codec:

 
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
User Configurable Resync:
 
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
License Keys:
 
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:

 
Call Progress Tones
Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Call Waiting Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Page Tone:
Alert Tone:
 
Distinctive Ring Patterns
Cadence 1: Cadence 2:
Cadence 3: Cadence 4:
Cadence 5: Cadence 6:
Cadence 7: Cadence 8:
Cadence 9:
 
Control Timer Values (sec)
Reorder Delay: Call Back Expires:
Call Back Retry Intvl: Call Back Delay:
Interdigit Long Timer: Interdigit Short Timer:
 
Vertical Service Activation Codes
Call Return Code: Blind Transfer Code:
Call Back Act Code: Call Back Deact Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
Secure All Call Act Code: Secure No Call Act Code:
Secure One Call Act Code: Secure One Call Deact Code:
Paging Code: Call Park Code:
Call Pickup Code: Call UnPark Code:
Group Call Pickup Code: Media Loopback Code:
Referral Services Codes:
Feature Dial Services Codes:
 
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
 
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
 
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: Time Offset (HH/mm):
Daylight Saving Time Rule:
Daylight Saving Time Enable: DTMF Playback Level:
DTMF Playback Length: Inband DTMF Boost:
Dictionary Server Script:
Language Selection: Default Character Encoding:

 
General
Station Name: Voice Mail Number:
Text Logo:
BMP Picture Download URL:
Select Logo: Select Background Picture:
Screen Saver Enable: Screen Saver Wait:
Screen Saver Icon:
 
Line Key 1
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Line Key 2
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Line Key 3
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Line Key 4
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Line Key 5
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Line Key 6
Extension: Short Name:
Share Call Appearance:
Extended Function:
 
Miscellaneous Line Key Settings
SCA Line ID Mapping: SCA Barge-In Enable:
 
Line Key LED Pattern
Idle LED: Remote Undefined LED:
Local Seized LED: Remote Seized LED:
Local Progressing LED: Remote Progressing LED:
Local Ringing LED: Remote Ringing LED:
Local Active LED: Remote Active LED:
Local Held LED: Remote Held LED:
Register Failed LED: Disabled LED:
Registering LED: Call Back Active LED:
 
Supplementary Services
Conference Serv: Attn Transfer Serv:
Blind Transfer Serv: DND Serv:
Block ANC Serv: Call Back Serv:
Block CID Serv: Secure Call Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Paging Serv:
Call Park Serv: Call Pick Up Serv:
ACD Login Serv: Group Call Pick Up Serv:
ACD Ext: Service Annc Serv:
Web Serv:
 
Ring Tone
Ring1:
Ring2:
Ring3:
Ring4:
Ring5:
Ring6:
Ring7:
Ring8:
Ring9:
Ring10:
 
Audio Input Gain (dB)
Handset Input Gain: Headset Input Gain:
Speakerphone Input Gain: Handset Additional Input Gain:
Headset Additional Input Gain: Speakerphone Additional Input Gain:
 
LDAP Corporate Directory Search
LDAP Dir Enable: LDAP Corp Dir Name:
LDAP Server: LDAP Auth Method:
LDAP Client DN:
LDAP Username: LDAP Password:
LDAP Search Base:
LDAP Last Name Filter: LDAP First Name Filter:
LDAP Search Item 3: LDAP Item 3 Filter:
LDAP Search Item 4: LDAP item 4 Filter:
LDAP Display Attrs:
LDAP Number Mapping:
 
Extension Mobility
EM Enable: EM User Domain:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
General
Line Enable:
 
Share Line Appearance
Share Ext: Shared User ID:
Subscription Expires:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP TOS/DiffServ Value: SIP CoS Value:
RTP TOS/DiffServ Value: RTP CoS Value:
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Transport: SIP Port:
SIP 100REL Enable: EXT SIP Port:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: Referor Bye Delay:
Refer-To Target Contact: Referee Bye Delay:
SIP Debug Option: Refer Target Bye Delay:
Sticky 183: Auth INVITE:
Ntfy Refer On 1xx-To-Inv: Use Anonymous With RPID:
Set G729 annexb:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Message Waiting: Auth Page:
Default Ring: Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server:
State Agent: CFWD Notify Serv:
CFWD Notifier:
 
Proxy and Registration
Proxy: Use Outbound Proxy:
Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Use Pref Codec Only:
Second Preferred Codec: Third Preferred Codec:
G729a Enable: G723 Enable:
G726-16 Enable: G726-24 Enable:
G726-32 Enable: G726-40 Enable:
Release Unused Codec: DTMF Process AVT:
Silence Supp Enable: DTMF Tx Method:
 
Dial Plan
Dial Plan:
Caller ID Map:
Enable IP Dialing: Emergency Number:

 
Call Forward
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
 
Speed Dial
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
Supplementary Services
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
Secure Call Setting: Dial Assistance:
Auto Answer Page: Preferred Audio Device:
Send Audio To Speaker: Time Format:
Date Format: Miss Call Shortcut:
Accept Media Loopback Request: Media Loopback Mode:
Media Loopback Type: Text Message:
Text Message From 3rd Party: Alert Tone Off:
Log Missed Calls for EXT 1: Log Missed Calls for EXT 2:
Log Missed Calls for EXT 3: Log Missed Calls for EXT 4:
Log Missed Calls for EXT 5: Log Missed Calls for EXT 6:
 
Web Information Service Settings
RSS Feed URL 1:
RSS Feed URL 2:
RSS Feed URL 3:
RSS Feed URL 4:
RSS Feed URL 5:
Feed Data Update Interval(m): Scrolling Timer(s):
 
Traffic Service Information Settings
State: City:
Street: Zip Code:
 
Audio Volume
Ringer Volume: Speaker Volume:
Handset Volume: Headset Volume:
LCD Contrast:
 
Phone GUI Menu Color Settings
Color Scheme:

 
General
Subscribe Expires: Subscribe Retry Interval:
Unit 1 Enable: Subscribe Delay:
Unit 2 Enable: Server Type:
Test Mode Enable: SPA932 Call Pickup Code:
 
Unit 1
Unit 1 Key 1:
Unit 1 Key 2:
Unit 1 Key 3:
Unit 1 Key 4:
Unit 1 Key 5:
Unit 1 Key 6:
Unit 1 Key 7:
Unit 1 Key 8:
Unit 1 Key 9:
Unit 1 Key 10:
Unit 1 Key 11:
Unit 1 Key 12:
Unit 1 Key 13:
Unit 1 Key 14:
Unit 1 Key 15:
Unit 1 Key 16:
Unit 1 Key 17:
Unit 1 Key 18:
Unit 1 Key 19:
Unit 1 Key 20:
Unit 1 Key 21:
Unit 1 Key 22:
Unit 1 Key 23:
Unit 1 Key 24:
Unit 1 Key 25:
Unit 1 Key 26:
Unit 1 Key 27:
Unit 1 Key 28:
Unit 1 Key 29:
Unit 1 Key 30:
Unit 1 Key 31:
Unit 1 Key 32:
 
Unit 2
Unit 2 Key 1:
Unit 2 Key 2:
Unit 2 Key 3:
Unit 2 Key 4:
Unit 2 Key 5:
Unit 2 Key 6:
Unit 2 Key 7:
Unit 2 Key 8:
Unit 2 Key 9:
Unit 2 Key 10:
Unit 2 Key 11:
Unit 2 Key 12:
Unit 2 Key 13:
Unit 2 Key 14:
Unit 2 Key 15:
Unit 2 Key 16:
Unit 2 Key 17:
Unit 2 Key 18:
Unit 2 Key 19:
Unit 2 Key 20:
Unit 2 Key 21:
Unit 2 Key 22:
Unit 2 Key 23:
Unit 2 Key 24:
Unit 2 Key 25:
Unit 2 Key 26:
Unit 2 Key 27:
Unit 2 Key 28:
Unit 2 Key 29:
Unit 2 Key 30:
Unit 2 Key 31:
Unit 2 Key 32:
   
User Login    basic  |  advanced



Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.