Cisco SPA Configuration

Router=20

Voice

Info

System

SIP

Provisioning
Regional

Line = 1

Line = 2

User = 1

User = 2

User Login =20 basic | advanced

=20
Product=20 Information=20
Product Name:	SPA-2102	Serial Number:	FM500K298371=20
Software Version:	5.2.10	Hardware Version:	1.3.5(a)=20
MAC Address:	000E0820FBC4	Client Certificate:	Installed=20
Customization:	Open
=20
System = Status=20
Current Time:	10/3/2011 22:11:04	Elapsed Time:	00:00:16=20
RTP Packets Sent:	0	RTP Bytes Sent:	0=20
RTP Packets Recv:	0	RTP Bytes Recv:	0=20
SIP Messages Sent:	4	SIP Bytes Sent:	1880=20
SIP Messages Recv:	4	SIP Bytes Recv:	1690=20
External IP:
=20
Line 1 = Status=20
Hook State:	On	Registration State:	Registered=20
Last Registration At:	10/3/2011 22:10:48	Next Registration In:	52 s=20
Message Waiting:	Yes	Call Back Active:	No=20
Last Called Number:		Last Caller Number:
Mapped SIP Port:
Call 1 State:	Idle	Call 2 State:	Idle=20
Call 1 Tone:	None	Call 2 Tone:	None=20
Call 1 Encoder:		Call 2 Encoder:
Call 1 Decoder:		Call 2 Decoder:
Call 1 FAX:		Call 2 FAX:
Call 1 Type:		Call 2 Type:
Call 1 Remote Hold:		Call 2 Remote Hold:
Call 1 Callback:		Call 2 Callback:
Call 1 Peer Name:		Call 2 Peer Name:
Call 1 Peer Phone:		Call 2 Peer Phone:
Call 1 Duration:		Call 2 Duration:
Call 1 Packets Sent:		Call 2 Packets Sent:
Call 1 Packets Recv:		Call 2 Packets Recv:
Call 1 Bytes Sent:		Call 2 Bytes Sent:
Call 1 Bytes Recv:		Call 2 Bytes Recv:
Call 1 Decode Latency:		Call 2 Decode Latency:
Call 1 Jitter:		Call 2 Jitter:
Call 1 Round Trip Delay:		Call 2 Round Trip Delay:
Call 1 Packets Lost:		Call 2 Packets Lost:
Call 1 Packet Error:		Call 2 Packet Error:
Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:
Call 1 Media Loopback:		Call 2 Media Loopback:
=20
Line 2 = Status=20
Hook State:	On	Registration State:	Registered=20
Last Registration At:	10/3/2011 22:10:48	Next Registration In:	52 s=20
Message Waiting:	Yes	Call Back Active:	No=20
Last Called Number:		Last Caller Number:
Mapped SIP Port:
Call 1 State:	Idle	Call 2 State:	Idle=20
Call 1 Tone:	None	Call 2 Tone:	None=20
Call 1 Type:		Call 2 Type:
Call 1 Encoder:		Call 2 Encoder:
Call 1 Decoder:		Call 2 Decoder:
Call 1 FAX:		Call 2 FAX:
Call 1 Remote Hold:		Call 2 Remote Hold:
Call 1 Callback:		Call 2 Callback:
Call 1 Peer Name:		Call 2 Peer Name:
Call 1 Peer Phone:		Call 2 Peer Phone:
Call 1 Duration:		Call 2 Duration:
Call 1 Packets Sent:		Call 2 Packets Sent:
Call 1 Packets Recv:		Call 2 Packets Recv:
Call 1 Bytes Sent:		Call 2 Bytes Sent:
Call 1 Bytes Recv:		Call 2 Bytes Recv:
Call 1 Decode Latency:		Call 2 Decode Latency:
Call 1 Jitter:		Call 2 Jitter:
Call 1 Round Trip Delay:		Call 2 Round Trip Delay:
Call 1 Packets Lost:		Call 2 Packets Lost:
Call 1 Packet Error:		Call 2 Packet Error:
Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:
Call 1 Media Loopback:		Call 2 Media Loopback:

=20
System=20 Configuration=20
Restricted Access Domains:	=20
Enable Web Admin Access:	=20	Admin Passwd:	=20
User Password:
=20
Miscellaneous=20 Settings=20
Syslog Server:		Debug Server:	=20
Debug Level:

=20
SIP = Parameters=20
Max Forward:		Max Redirection:	=20
Max Auth:		SIP User Agent Name:	=20
SIP Server Name:		SIP Reg User Agent Name:	=20
SIP Accept Language:		DTMF Relay MIME Type:	=20
Hook Flash MIME Type:		Remove Last Reg:	=20
Use Compact Header:	=20	Escape Display Name:	=20
RFC 2543 Call Hold:	=20	Mark All AVT Packets:	=20
SIP TCP Port Min:		SIP TCP Port Max:	=20
=20
SIP Timer = Values=20 (sec)=20
SIP T1:		SIP T2:	=20
SIP T4:		SIP Timer B:	=20
SIP Timer F:		SIP Timer H:	=20
SIP Timer D:		SIP Timer J:	=20
INVITE Expires:		ReINVITE Expires:	=20
Reg Min Expires:		Reg Max Expires:	=20
Reg Retry Intvl:		Reg Retry Long Intvl:	=20
Reg Retry Random Delay:		Reg Retry Long Random Delay:	=20
Reg Retry Intvl Cap:
=20
Response = Status Code=20 Handling=20
SIT1 RSC:		SIT2 RSC:	=20
SIT3 RSC:		SIT4 RSC:	=20
Try Backup RSC:		Retry Reg RSC:	=20
=20
RTP = Parameters=20
RTP Port Min:		RTP Port Max:	=20
RTP Packet Size:		Max RTP ICMP Err:	=20
RTCP Tx Interval:		No UDP Checksum:	=20
Stats In BYE:	=20
=20
SDP Payload = Types=20
NSE Dynamic Payload:		AVT Dynamic Payload:	=20
INFOREQ Dynamic Payload:		G726r16 Dynamic Payload:	=20
G726r24 Dynamic Payload:		G726r32 Dynamic Payload:	=20
G726r40 Dynamic Payload:		G729b Dynamic Payload:	=20
EncapRTP Dynamic Payload:		RTP-Start-Loopback Dynamic Payload:	=20
RTP-Start-Loopback Codec:		NSE Codec Name:	=20
AVT Codec Name:		G711u Codec Name:	=20
G711a Codec Name:		G726r16 Codec Name:	=20
G726r24 Codec Name:		G726r32 Codec Name:	=20
G726r40 Codec Name:		G729a Codec Name:	=20
G729b Codec Name:		G723 Codec Name:	=20
EncapRTP Codec Name:
=20
NAT Support = Parameters=20
Handle VIA received:	=20	Handle VIA rport:	=20
Insert VIA received:	=20	Insert VIA rport:	=20
Substitute VIA Addr:	=20	Send Resp To Src Port:	=20
STUN Enable:	=20	STUN Test Enable:	=20
STUN Server:		TURN Server:	=20
Auth Server:		EXT IP:	=20
EXT RTP Port Min:		NAT Keep Alive Intvl:

=20
Configuration=20 Profile=20
Provision Enable:	=20	Resync On Reset:	=20
Resync Random Delay:		Resync Periodic:	=20
Resync Error Retry Delay:		Forced Resync Delay:	=20
Resync From SIP:	=20	Resync After Upgrade Attempt:	=20
Resync Trigger 1:	=20
Resync Trigger 2:	=20
Resync Fails On FNF:	=20
Profile Rule:	=20
Profile Rule B:	=20
Profile Rule C:	=20
Profile Rule D:	=20
Log Resync Request Msg:	=20
Log Resync Success Msg:	=20
Log Resync Failure Msg:	=20
Report Rule:	=20
=20
Firmware = Upgrade=20
Upgrade Enable:	=20	Upgrade Error Retry Delay:	=20
Downgrade Rev Limit:
Upgrade Rule:	=20
Log Upgrade Request Msg:	=20
Log Upgrade Success Msg:	=20
Log Upgrade Failure Msg:	=20
License Keys:	=20
=20
General = Purpose=20 Parameters=20
GPP A:	=20
GPP B:	=20
GPP C:	=20
GPP D:	=20
GPP E:	=20
GPP F:	=20
GPP G:	=20
GPP H:	=20
GPP I:	=20
GPP J:	=20
GPP K:	=20
GPP L:	=20
GPP M:	=20
GPP N:	=20
GPP O:	=20
GPP P:

=20
Call = Progress=20 Tones=20
Dial Tone:	=20
Second Dial Tone:	=20
Outside Dial Tone:	=20
Prompt Tone:	=20
Busy Tone:	=20
Reorder Tone:	=20
Off Hook Warning Tone:	=20
Ring Back Tone:	=20
Ring Back 2 Tone:	=20
Confirm Tone:	=20
SIT1 Tone:	=20
SIT2 Tone:	=20
SIT3 Tone:	=20
SIT4 Tone:	=20
MWI Dial Tone:	=20
Cfwd Dial Tone:	=20
Holding Tone:	=20
Conference Tone:	=20
Secure Call Indication Tone:	=20
Feature Invocation Tone:	=20
=20
Distinctive = Ring=20 Patterns=20
Ring1 Cadence:		Ring2 Cadence:	=20
Ring3 Cadence:		Ring4 Cadence:	=20
Ring5 Cadence:		Ring6 Cadence:	=20
Ring7 Cadence:		Ring8 Cadence:	=20
Ring9 Cadence:
=20
Distinctive = Call=20 Waiting Tone Patterns=20
CWT1 Cadence:		CWT2 Cadence:	=20
CWT3 Cadence:		CWT4 Cadence:	=20
CWT5 Cadence:		CWT6 Cadence:	=20
CWT7 Cadence:		CWT8 Cadence:	=20
CWT9 Cadence:
=20
Distinctive = Ring/CWT=20 Pattern Names=20
Ring1 Name:		Ring2 Name:	=20
Ring3 Name:		Ring4 Name:	=20
Ring5 Name:		Ring6 Name:	=20
Ring7 Name:		Ring8 Name:	=20
Ring9 Name:
=20
Ring and = Call Waiting=20 Tone Spec=20
Ring Waveform:		Ring Frequency:	=20
Ring Voltage:		CWT Frequency:	=20
=20
Control = Timer Values=20 (sec)=20
Hook Flash Timer Min:		Hook Flash Timer Max:	=20
Callee On Hook Delay:		Reorder Delay:	=20
Call Back Expires:		Call Back Retry Intvl:	=20
Call Back Delay:		VMWI Refresh Intvl:	=20
Interdigit Long Timer:		Interdigit Short Timer:	=20
CPC Delay:		CPC Duration:	=20
=20
Vertical = Service=20 Activation Codes=20
Call Return Code:		Call Redial Code:	=20
Blind Transfer Code:		Call Back Act Code:	=20
Call Back Deact Code:		Call Back Busy Act Code:	=20
Cfwd All Act Code:		Cfwd All Deact Code:	=20
Cfwd Busy Act Code:		Cfwd Busy Deact Code:	=20
Cfwd No Ans Act Code:		Cfwd No Ans Deact Code:	=20
Cfwd Last Act Code:		Cfwd Last Deact Code:	=20
Block Last Act Code:		Block Last Deact Code:	=20
Accept Last Act Code:		Accept Last Deact Code:	=20
CW Act Code:		CW Deact Code:	=20
CW Per Call Act Code:		CW Per Call Deact Code:	=20
Block CID Act Code:		Block CID Deact Code:	=20
Block CID Per Call Act Code:		Block CID Per Call Deact Code:	=20
Block ANC Act Code:		Block ANC Deact Code:	=20
DND Act Code:		DND Deact Code:	=20
CID Act Code:		CID Deact Code:	=20
CWCID Act Code:		CWCID Deact Code:	=20
Dist Ring Act Code:		Dist Ring Deact Code:	=20
Speed Dial Act Code:		Secure All Call Act Code:	=20
Secure No Call Act Code:		Secure One Call Act Code:	=20
Secure One Call Deact Code:		Conference Act Code:	=20
Attn-Xfer Act Code:		Modem Line Toggle Code:	=20
FAX Line Toggle Code:		Media Loopback Code:	=20
Referral Services Codes:	=20
Feature Dial Services Codes:	=20
=20
Vertical = Service=20 Announcement Codes=20
Service Annc Base Number:
Service Annc Extension Codes:	=20
=20
Outbound = Call Codec=20 Selection Codes=20
Prefer G711u Code:		Force G711u Code:	=20
Prefer G711a Code:		Force G711a Code:	=20
Prefer G723 Code:		Force G723 Code:	=20
Prefer G726r16 Code:		Force G726r16 Code:	=20
Prefer G726r24 Code:		Force G726r24 Code:	=20
Prefer G726r32 Code:		Force G726r32 Code:	=20
Prefer G726r40 Code:		Force G726r40 Code:	=20
Prefer G729a Code:		Force G729a Code:	=20
=20
Miscellaneous=20
Set Local Date (mm/dd):		Set Local Time (HH/mm):	=20
Time Zone:		FXS Port Impedance:	=20
Daylight Saving Time Rule:	=20
Daylight Saving Time Enable:	=20	FXS Port Input Gain:	=20
FXS Port Output Gain:		DTMF Playback Level:	=20
DTMF Playback Length:		Detect ABCD:	=20
Playback ABCD:	=20	Caller ID Method:	=20
Caller ID FSK Standard:		Feature Invocation Method:	=20
More Echo Suppression:	=20

=20

Line Enable:	=20
=20
Streaming = Audio Server=20 (SAS)=20
SAS Enable:	=20	SAS DLG Refresh Intvl:	=20
SAS Inbound RTP Sink:
=20
NAT = Settings=20
NAT Mapping Enable:	=20	NAT Keep Alive Enable:	=20
NAT Keep Alive Msg:		NAT Keep Alive Dest:	=20
=20
Network = Settings=20
SIP ToS/DiffServ Value:		SIP CoS Value:	[0-7]=20
RTP ToS/DiffServ Value:		RTP CoS Value:	[0-7]=20
Network Jitter Level:		Jitter Buffer Adjustment:	=20
=20
SIP = Settings=20
SIP Transport:		SIP Port:	=20
SIP 100REL Enable:	=20	EXT SIP Port:	=20
Auth Resync-Reboot:	=20	SIP Proxy-Require:	=20
SIP Remote-Party-ID:	=20	SIP GUID:	=20
SIP Debug Option:		RTP Log Intvl:	=20
Restrict Source IP:	=20	Referor Bye Delay:	=20
Refer Target Bye Delay:		Referee Bye Delay:	=20
Refer-To Target Contact:	=20	Sticky 183:	=20
Auth INVITE:	=20	Reply 182 On Call Waiting:	=20
Use Anonymous With RPID:	=20	Use Local Addr In FROM:	=20
=20
Call = Feature=20 Settings=20
Blind Attn-Xfer Enable:	=20	MOH Server:	=20
Xfer When Hangup Conf:	=20	Conference Bridge URL:	=20
Conference Bridge Ports:
=20
Proxy and=20 Registration=20
Proxy:	=20
Outbound Proxy:	=20
Use Outbound Proxy:	=20	Use OB Proxy In Dialog:	=20
Register:	=20	Make Call Without Reg:	=20
Register Expires:		Ans Call Without Reg:	=20
Use DNS SRV:	=20	DNS SRV Auto Prefix:	=20
Proxy Fallback Intvl:		Proxy Redundancy Method:	=20
Voice Mail Server:		Mailbox Subscribe Expires:	=20
=20
Subscriber=20 Information=20
Display Name:		User ID:	=20
Password:		Use Auth ID:	=20
Auth ID:
Mini Certificate:	=20
SRTP Private Key:	=20
=20
Supplementary Service=20 Subscription=20
Call Waiting Serv:	=20	Block CID Serv:	=20
Block ANC Serv:	=20	Dist Ring Serv:	=20
Cfwd All Serv:	=20	Cfwd Busy Serv:	=20
Cfwd No Ans Serv:	=20	Cfwd Sel Serv:	=20
Cfwd Last Serv:	=20	Block Last Serv:	=20
Accept Last Serv:	=20	DND Serv:	=20
CID Serv:	=20	CWCID Serv:	=20
Call Return Serv:	=20	Call Redial Serv:	=20
Call Back Serv:	=20	Three Way Call Serv:	=20
Three Way Conf Serv:	=20	Attn Transfer Serv:	=20
Unattn Transfer Serv:	=20	MWI Serv:	=20
VMWI Serv:	=20	Speed Dial Serv:	=20
Secure Call Serv:	=20	Referral Serv:	=20
Feature Dial Serv:	=20	Service Announcement Serv:	=20
=20
Audio=20 Configuration=20
Preferred Codec:		Second Preferred Codec:	=20
Third Preferred Codec:		Use Pref Codec Only:	=20
Silence Supp Enable:	=20	Silence Threshold:	=20
G729a Enable:	=20	Echo Canc Enable:	=20
G723 Enable:	=20	Echo Canc Adapt Enable:	=20
G726-16 Enable:	=20	Echo Supp Enable:	=20
G726-24 Enable:	=20	FAX CED Detect Enable:	=20
G726-32 Enable:	=20	FAX CNG Detect Enable:	=20
G726-40 Enable:	=20	FAX Passthru Codec:	=20
DTMF Process INFO:	=20	FAX Codec Symmetric:	=20
DTMF Process AVT:	=20	FAX Passthru Method:	=20
DTMF Tx Method:		DTMF Tx Mode:	=20
DTMF Tx Strict Hold Off Time:		FAX Process NSE:	=20
Hook Flash Tx Method:		FAX Disable ECAN:	=20
Release Unused Codec:	=20	FAX Enable T38:	=20
FAX T38 Redundancy:		FAX Tone Detect Mode:	=20
=20
Dial = Plan=20
Dial Plan:	\|<8:vm>\|<9:aa>\|<1:100>\|<*97:vmm>\|0,[3469]11S0\|0,= [2-9]xxxxxx\|0,[2-9]xxxxxxxxxS0\|0,1[2-9]xxxxxxxxxS0\|0,011xx.\|xxx.\|[2345678= 9])"=20 maxLength=3D2047 size=3D70 name=3D31407>=20
Enable IP Dialing:	=20	Emergency Number:	=20
=20
FXS Port = Polarity=20 Configuration=20
Idle Polarity:		Caller Conn Polarity:	=20
Callee Conn Polarity:

=20

Line Enable:	=20
=20
Streaming = Audio Server=20 (SAS)=20
SAS Enable:	=20	SAS DLG Refresh Intvl:	=20
SAS Inbound RTP Sink:
=20
NAT = Settings=20
NAT Mapping Enable:	=20	NAT Keep Alive Enable:	=20
NAT Keep Alive Msg:		NAT Keep Alive Dest:	=20
=20
Network = Settings=20
SIP ToS/DiffServ Value:		SIP CoS Value:	[0-7]=20
RTP ToS/DiffServ Value:		RTP CoS Value:	[0-7]=20
Network Jitter Level:		Jitter Buffer Adjustment:	=20
=20
SIP = Settings=20
SIP Transport:		SIP Port:	=20
SIP 100REL Enable:	=20	EXT SIP Port:	=20
Auth Resync-Reboot:	=20	SIP Proxy-Require:	=20
SIP Remote-Party-ID:	=20	SIP GUID:	=20
SIP Debug Option:		RTP Log Intvl:	=20
Restrict Source IP:	=20	Referor Bye Delay:	=20
Refer Target Bye Delay:		Referee Bye Delay:	=20
Refer-To Target Contact:	=20	Sticky 183:	=20
Auth INVITE:	=20	Reply 182 On Call Waiting:	=20
Use Anonymous With RPID:	=20	Use Local Addr In FROM:	=20
=20
Call = Feature=20 Settings=20
Blind Attn-Xfer Enable:	=20	MOH Server:	=20
Xfer When Hangup Conf:	=20	Conference Bridge URL:	=20
Conference Bridge Ports:
=20
Proxy and=20 Registration=20
Proxy:	=20
Outbound Proxy:	=20
Use Outbound Proxy:	=20	Use OB Proxy In Dialog:	=20
Register:	=20	Make Call Without Reg:	=20
Register Expires:		Ans Call Without Reg:	=20
Use DNS SRV:	=20	DNS SRV Auto Prefix:	=20
Proxy Fallback Intvl:		Proxy Redundancy Method:	=20
Voice Mail Server:		Mailbox Subscribe Expires:	=20
=20
Subscriber=20 Information=20
Display Name:		User ID:	=20
Password:		Use Auth ID:	=20
Auth ID:
Mini Certificate:	=20
SRTP Private Key:	=20
=20
Supplementary Service=20 Subscription=20
Call Waiting Serv:	=20	Block CID Serv:	=20
Block ANC Serv:	=20	Dist Ring Serv:	=20
Cfwd All Serv:	=20	Cfwd Busy Serv:	=20
Cfwd No Ans Serv:	=20	Cfwd Sel Serv:	=20
Cfwd Last Serv:	=20	Block Last Serv:	=20
Accept Last Serv:	=20	DND Serv:	=20
CID Serv:	=20	CWCID Serv:	=20
Call Return Serv:	=20	Call Redial Serv:	=20
Call Back Serv:	=20	Three Way Call Serv:	=20
Three Way Conf Serv:	=20	Attn Transfer Serv:	=20
Unattn Transfer Serv:	=20	MWI Serv:	=20
VMWI Serv:	=20	Speed Dial Serv:	=20
Secure Call Serv:	=20	Referral Serv:	=20
Feature Dial Serv:	=20	Service Announcement Serv:	=20
=20
Audio=20 Configuration=20
Preferred Codec:		Second Preferred Codec:	=20
Third Preferred Codec:		Use Pref Codec Only:	=20
Silence Supp Enable:	=20	Silence Threshold:	=20
G729a Enable:	=20	Echo Canc Enable:	=20
G723 Enable:	=20	Echo Canc Adapt Enable:	=20
G726-16 Enable:	=20	Echo Supp Enable:	=20
G726-24 Enable:	=20	FAX CED Detect Enable:	=20
G726-32 Enable:	=20	FAX CNG Detect Enable:	=20
G726-40 Enable:	=20	FAX Passthru Codec:	=20
DTMF Process INFO:	=20	FAX Codec Symmetric:	=20
DTMF Process AVT:	=20	FAX Passthru Method:	=20
DTMF Tx Method:		DTMF Tx Mode:	=20
DTMF Tx Strict Hold Off Time:		FAX Process NSE:	=20
Hook Flash Tx Method:		FAX Disable ECAN:	=20
Release Unused Codec:	=20	FAX Enable T38:	=20
FAX T38 Redundancy:		FAX Tone Detect Mode:	=20
=20
Dial = Plan=20
Dial Plan:	\|<8:vm>\|<9:aa>\|<1:100>\|<*97:vmm>\|0,[3469]11S0\|0,= [2-9]xxxxxx\|0,[2-9]xxxxxxxxxS0\|0,1[2-9]xxxxxxxxxS0\|0,011xx.\|xxx.\|[2345678= 9])"=20 maxLength=3D2047 size=3D70 name=3D30767>=20
Enable IP Dialing:	=20	Emergency Number:	=20
=20
FXS Port = Polarity=20 Configuration=20
Idle Polarity:		Caller Conn Polarity:	=20
Callee Conn Polarity:

=20
Call = Forward=20 Settings=20
Cfwd All Dest:		Cfwd Busy Dest:	=20
Cfwd No Ans Dest:		Cfwd No Ans Delay:	=20
=20
Selective = Call Forward=20 Settings=20
Cfwd Sel1 Caller:		Cfwd Sel1 Dest:	=20
Cfwd Sel2 Caller:		Cfwd Sel2 Dest:	=20
Cfwd Sel3 Caller:		Cfwd Sel3 Dest:	=20
Cfwd Sel4 Caller:		Cfwd Sel4 Dest:	=20
Cfwd Sel5 Caller:		Cfwd Sel5 Dest:	=20
Cfwd Sel6 Caller:		Cfwd Sel6 Dest:	=20
Cfwd Sel7 Caller:		Cfwd Sel7 Dest:	=20
Cfwd Sel8 Caller:		Cfwd Sel8 Dest:	=20
Cfwd Last Caller:		Cfwd Last Dest:	=20
Block Last Caller:		Accept Last Caller:	=20
=20
Speed Dial=20 Settings=20
Speed Dial 2:		Speed Dial 3:	=20
Speed Dial 4:		Speed Dial 5:	=20
Speed Dial 6:		Speed Dial 7:	=20
Speed Dial 8:		Speed Dial 9:	=20
=20
Supplementary Service=20 Settings=20
CW Setting:	=20	Block CID Setting:	=20
Block ANC Setting:	=20	DND Setting:	=20
CID Setting:	=20	CWCID Setting:	=20
Dist Ring Setting:	=20	Secure Call Setting:	=20
Message Waiting:	=20	Accept Media Loopback Request:	=20
Media Loopback Mode:		Media Loopback Type:	=20
=20
Distinctive = Ring=20 Settings=20
Ring1 Caller:		Ring2 Caller:	=20
Ring3 Caller:		Ring4 Caller:	=20
Ring5 Caller:		Ring6 Caller:	=20
Ring7 Caller:		Ring8 Caller:	=20
Ring9 Caller:
=20
Ring = Settings=20
Default Ring:		Default CWT:	=20
Hold Reminder Ring:		Call Back Ring:	=20
Cfwd Ring Splash Len:		Cblk Ring Splash Len:	=20
VMWI Ring Splash Len:		VMWI Ring Policy:	=20
Ring On No New VM:	=20

=20
Call = Forward=20 Settings=20
Cfwd All Dest:		Cfwd Busy Dest:	=20
Cfwd No Ans Dest:		Cfwd No Ans Delay:	=20
=20
Selective = Call Forward=20 Settings=20
Cfwd Sel1 Caller:		Cfwd Sel1 Dest:	=20
Cfwd Sel2 Caller:		Cfwd Sel2 Dest:	=20
Cfwd Sel3 Caller:		Cfwd Sel3 Dest:	=20
Cfwd Sel4 Caller:		Cfwd Sel4 Dest:	=20
Cfwd Sel5 Caller:		Cfwd Sel5 Dest:	=20
Cfwd Sel6 Caller:		Cfwd Sel6 Dest:	=20
Cfwd Sel7 Caller:		Cfwd Sel7 Dest:	=20
Cfwd Sel8 Caller:		Cfwd Sel8 Dest:	=20
Cfwd Last Caller:		Cfwd Last Dest:	=20
Block Last Caller:		Accept Last Caller:	=20
=20
Speed Dial=20 Settings=20
Speed Dial 2:		Speed Dial 3:	=20
Speed Dial 4:		Speed Dial 5:	=20
Speed Dial 6:		Speed Dial 7:	=20
Speed Dial 8:		Speed Dial 9:	=20
=20
Supplementary Service=20 Settings=20
CW Setting:	=20	Block CID Setting:	=20
Block ANC Setting:	=20	DND Setting:	=20
CID Setting:	=20	CWCID Setting:	=20
Dist Ring Setting:	=20	Secure Call Setting:	=20
Message Waiting:	=20	Accept Media Loopback Request:	=20
Media Loopback Mode:		Media Loopback Type:	=20
=20
Distinctive = Ring=20 Settings=20
Ring1 Caller:		Ring2 Caller:	=20
Ring3 Caller:		Ring4 Caller:	=20
Ring5 Caller:		Ring6 Caller:	=20
Ring7 Caller:		Ring8 Caller:	=20
Ring9 Caller:
=20
Ring = Settings=20
Default Ring:		Default CWT:	=20
Hold Reminder Ring:		Call Back Ring:	=20
Cfwd Ring Splash Len:		Cblk Ring Splash Len:	=20
VMWI Ring Splash Len:		VMWI Ring Policy:	=20
Ring On No New VM:	=20

=20

User Login =20 basic | advanced=20

Info

System

SIP

Provisioning Regional Line = 1 Line = 2 User = 1 User = 2 User Login =20 basic | advanced

Regional

Line = 1

Line = 2

User = 1

User = 2

Provisioning
Regional

Line = 1

Line = 2

User = 1

User = 2

User Login =20 basic | advanced